This wire for welding operations is used by LPG cylinder manufacturers, special welded pipe plants and wheel manufacturing of heavy earth moving vehicles etc.

The quality need of this product is also very demanding since they have to be made with prescribed parameters. Thus strict quality control standards along with stage wise inspections are ensured to enable achieve the right quality of the end product.

Saw wires are manufactured in various grades as per IS codes as well as AWS laid specifications. Uniform surface with desired copper coating along with clear surface of wire, free from rust, foreign particles, grease is ensured to enable ensure best possible welding quality.

CUSTOMER SPECIFIED

CHEMICAL COMPOSITION

Element C Si Mn S P Cr Mo Specification % % % % % % % IS 7280 AWS AS1 EL 8 0.10 max 0.03 max 0.40-0.60 0.03 max 0.03 max - - AS2 EM 12 K 0.08-0.15 0.05-0.15 0.80-1.20 0.03 max 0.03 max - - AS3 EH 14 0.08-0.15 0.05-0.25 1.30-1.70 0.03 max 0.03 max - - AS2 Mo EA 2 0.08-0.15 0.05-0.15 0.80-1.20 0.03 max 0.03 max - 0.45-0.60

PHYSICAL PROPERTIES

Grade Tensile Strength Yield Strength Impact Unit N / sq mm N / sq mm Joules AS1 EL 8 550 470 28 deg C AS2 EM 12 K 600 500  30 deg C AS3 EH 14 700 600  27 deg C AS2 Mo EA 2 650 550  27 deg C Diameter 1.60 mm to 5.00 mm Weigh of Cu Coating 0.4% max by weight

PACKING

Drums 700 to 1000 kgs Suitably packed in polythene with silica gel Reels 70 to 300 kgs ID = 400 to 700 mm : Width 100 to 150 mm